江苏龙网

  1. 主页 > 生活百科 > >

smart-link配置 华三smartlink&monitorlink( 二 )


SW2配置monitor link

[SW2]monitor-link group 2
[SW2-mtlk-group2]port GigabitEthernet 0/0/1 uplink
[SW2-mtlk-group2]port GigabitEthernet 0/0/3 downlink 1
7、配置Monitor Link组的回切时间
[SW1-mtlk-group1]timer recover-time 10
[SW2-mtlk-group2]timer recover-time 10
8、验证
在SW1上smrt link状态
[SW1]dis smart-link group 1
Smart Link group 1 information :
Smart Link group was enabled
Wtr-time is: 30 sec.
There is no Load-Balance
There is no protected-vlan reference-instance
DeviceID: 4c1f-cc10-69d8Control-vlan ID: 10
MemberRoleStateFlush Count Last-Flush-Time
----------------------------------------------------------------------
GigabitEthernet0/0/1Master Active12022/07/22 20:58:32 UTC-08
GigabitEthernet0/0/2SlaveInactive 00000/00/00 00:00:00 UTC+00
在SW1上monitor link状态
[SW1]display monitor-link group 1
Monitor Link group 1 information :
Recover-timer is 10 sec.
MemberRoleState Last-up-timeLast-down-tim
Smart-link1UpLkUP0000/00/00 00:00:00 UTC+00:000000/0
0/00 00:00:00 UTC+00:00
GigabitEthernet0/0/3DwLk[1]UP0000/00/00 00:00:00 UTC+00:000000/0
0/00 00:00:00 UTC+00:00
Tags：


推荐阅读


上一篇：汉字的起源与汉字的来历 关于汉字的起源的六种说法

下一篇：什么是踢猫效应 踢猫效应